Tuesday, October 21, 2014

The Importance Of FAA Obstruction Lights

By Patty Goff


Tall buildings that have many floors are sometimes considered hazards to planes depending on how high they extend. This is usually because pilots need to be careful near them. The Federal Aviation Administration is meant to ensure safety of the people who fly and it has put in place regulations that govern how warning signs should be placed on tall structures. FAA obstruction lights should be placed according to set regulations.

All buildings whose height is above 200 feet are subjected to the requirements of the FAA. Some buildings are also subjected to the same despite them being shorter than 200 feet. This is usually because of the geographical location of such buildings. Studies done by the aviation administration may determine special requirements. Despite having reached the maximum height required for warning signs some buildings are not subjected to regulations because they pose no danger.

A few structures are exceptionally unsafe and consequently have uncommon benchmarks set for them. The suggestions for warning lighting normally depend with the region, the territory and the atmosphere. The configuration design and number of turbines are the elements that become an integral factor when you consider wind turbines.

It is important to anchor your building using guy wires. This is because FAA requires that pilots steer the planes more than 500 feet from structures which are man-made. When installing guy wires planes have to clear them by 200 feet on the horizontal direction. Lighting is very important because guy wires are not visible until the pilot is very near.

There are a few manifestations of lighting for various types of situations. A few lights are intended to continue glimmering while others are enduring. The most well known shades are white and red. The mixture of lighting frameworks is intended to make it feasible for the cautioning framework to be utilized at distinctive times and for different reasons. Lighting likewise comes in distinctive intensities. Warning lights need to have medium, high or low intensities. In a few situations it is prudent to have double lighting. The right framework to be utilized is typically dictated by the tallness of your structure.

Around nighttime it is obliged that red lighting should remain be on. They can be gleaming or they can be consistent on the aides of the structures. Structures higher than 200 feet need white blasting light which has an intensity that is medium. It should remain like this in the midst of day time and in the midst of sunset hours. Amid the night reducing the intensity is advisable. Glinting light of high power can be used in the midst of nightfall hours or daytime. Regardless, they must be reduced in the midst of the night.

If you want to use lighting of high intensity it should be twilight hours or during the day. At night the intensity should be automatically reduced. However, this practice is not recommended for buildings higher than 500 feet. Dual systems utilize the red color for night times and a high or medium intensity flashing light when it is day time.

You should install a couple of medium or high intensity lighting systems when the building is being constructed. This should happen when it has reached the required height. In areas where the lighting on the street is white red lights should be used as warning signs. The dual system can also be utilized.




About the Author:



No comments:

Post a Comment